PIPSi300W-24-110 , Water tight industrial grade pure sine wave DC/AC inverters, 24VDC, 115VAC Versions, IP66 rated
Sorry! We don`t have MSDS!
PIPSi300W-24-110 , Water tight industrial grade pure sine wave DC/AC inverters, 24VDC, 115VAC Versions, IP66 rated
Input Voltage MIN (V) : 20
Input Voltage MAX (V) : 30
Output Max Current (A) : 2.5
Output Voltage (V) : 110
Output Connector : Screw Terminals
Output Frequency(Hz) : 50/60
Output Wattage (W) : 287
Isolation : Isolated with greater than 100V hipot
Output max Current <60sec (A) : 3.3
Protections : Output short, Polarity reverse, Under voltage input
Cooling (passive if not specified) :
Style : Water tight
Safety : NA
Notes : Pure sine wave
Environment : -25C to +50C operating, -40C to +70C storage
Humidity max (%) : 100
Efficiency (%) : 80
HiPot/ESD :
Input Connector : Screw Terminals
MTBF :
Weight (g) : 5500.00
These
IP66 rated, water proof, pure sine wave inverters build in Canada with
very high quality. It is 24V input and 110V (115V) AC output. Any 24V lead acid
or compatible with that voltage battery can be used with this inverter.
They are:
- Pure sine wave exactly duplicates household current.
- Crystal controlled for precise timing for digital clocks and
controllers. Controlled ±0.01 Hz.
- Isolated, can be used in positive or negative ground
applications.
- Extra heavy filtering to isolate noise from equipment sharing the same battery
- Ultra quiet with no electrical interference.
- Very rugged and reliable, CSA listed.
- Low voltage warning and shutdown to protect the batteries
- Suitable for operation with lead acid, sealed lead acid, 6 cell lithium ion and 8 cell lithium iron phosphate batteries.
- Thermostatically controlled fan comes on only when needed.
- Manufactured in accordance with COTS standard IPC-A-610.
- Fully Isolated >1500 volts isolation from case to output terminals or between input and output terminals. >500V isolation between input terminals and case
- Meets MIL-Spec loose cargo requirement
- 34.5 dB when fan is operating, Fan comes on when needed
- Standard AC output receptacle and inputs are Screw terminals with cable clamp
This inverter has 'Power Wizard' software. User
can select output frequency, output voltage (within ±10 percent of the
standard voltage), output frequency (50 or 60 Hz) and low voltage shutdown
parameters (to match the battery voltage) from any laptop through the standard
micro-usb interface.