PIPSi300W-12-110, Water tight industrial grade pure sine wave DC/AC inverters, 12VDC 115VAC Versions, IP66 rated
Sorry! We don`t have MSDS!
PIPSi300W-12-110, Water tight industrial grade pure sine wave DC/AC inverters, 12VDC 115VAC Versions, IP66 rated
Input Voltage MIN (V) : 10.6
Input Voltage MAX (V) : 16
Output Max Current (A) : 2.5
Output Voltage (V) : 110
Output Connector : Screw Terminals
Output Frequency(Hz) : 50/60
Output Wattage (W) : 287
Isolation : Isolated with greater than 100V hipot
Output max Current <60sec (A) : 3.3
Protections : Output short, Polarity reverse, Under voltage input
Cooling (passive if not specified) :
Style : Water tight
Safety : NA
Notes : Pure sine wave
Environment : -25C to +50C operating, -40C to +70C storage
Humidity max (%) : 100
Efficiency (%) : 80
HiPot/ESD :
Input Connector : Screw Terminals
MTBF :
Weight (g) : 5500.00
These IP66 rated, water proof, pure sine wave inverters build in Canada with very high quality.
They are:
- Pure sine wave exactly duplicates household current.
- Crystal controlled for precise timing for digital clocks and
controllers. Controlled ±0.01 Hz.
- Isolated, can be used in positive or negative ground
applications.
- Extra heavy filtering to isolate noise from equipment sharing the same battery
- Ultra quiet with no electrical interference.
- Very rugged and reliable, CSA listed.
- Low voltage warning and shutdown to protect the batteries
- Suitable for operation with lead acid, sealed lead acid, 3 cell lithium ion and 4 cell lithium iron phosphate batteries.
- Thermostatically controlled fan comes on only when needed.
- Manufactured in accordance with COTS standard IPC-A-610.
- Fully Isolated >1500 volts isolation from case to output terminals or between input and output terminals. >500V isolation between input terminals and case
- Meets MIL-Spec loose cargo requirement
- 34.5 dB when fan is operating, Fan comes on when needed
- Standard AC output receptacle and inputs are Screw terminals with cable clamp
This inverter has 'Power Wizard' software. User
can select output frequency, output voltage (within ±10 percent of the
standard voltage), output frequency (50 or 60 Hz) and low voltage shutdown
parameters (to match the battery voltage) from any laptop through the standard
micro-usb interface.