PGEB-NM651825, non-magnetic lithium polymer battery , 6.5mm x 18mm x 25 mm

Sorry! We don`t have specification!

Download MSDS

Model : PGEB-NM651825

  • PGEB-NM651825, non-magnetic lithium polymer battery , 6.5mm x 18mm x 25 mm

This product has a minimum quantity of 1000

PGEB-NM651825, non-magnetic lithium polymer battery , 6.5mm x 18mm x 25 mm


Battery type : Li-polymer non magnetic

Battery capacity (mAh) : 250

Battery capacity, nominal (mAh) : 250

Shape : Pouch cell

Thickness (mm) : 6.5

Width (mm) : 18

Length (mm) : 25

Nominal Voltage (V) : 3.7

Discharge current (C-rate) : 0.5

Max discharge current (CmA) : 1

Charge Voltage (V) : 4.2

Max. Charge Voltage (V) : 4.23

Charge Current (recommended) (CmA) : 0.2

Charge Time Approx (h) : 2.5

Protections : No

Operating Temperature,Discharge (C) : -20~+60

Operating Temperature, Charge (C) : 0-45

DC Impedance Resistance (Ohm) : 0.35

Test reports or certificates :

EXTRA NOTE : Bare tabs

Weight (g) : 6.00

Non-magnetic Lithium Polymer Cells. We have a limited variety of cells at the moment, but we can make other sizes with a minimum order of 1500 cells.

This battery is intended for use in applications that are sensitive to magnetism, such as magnetometers and equipment used in MRI rooms.

They are

User's comments on the PGEB-NM651825:
Two versions of my data logger that both use the 250 mAh battery (PGEB-NM651825 ) without the protective PCB has been formally safety tested by an MRI safety testing company for deflection angle and torque, a lighter shorter version that does not have a titanium capsule, just screening, and the larger version with the titanium capsule, both insulated on the outside. No issues were found for deflection angle or torque. The deflection angle in both cases was a negligible 3 -3.5°, confirming the qualitative test I did here myself.